Direct Vent Propane LPG Tankless Water Heater 6L 12L Electronic Ignition Wall Mounted Design
The product offers a smart variable flow rate from 6 to 12 liters per minute. Through the coordinated operation of a precise gas proportional valve and a water flow servo, it achieves a stable showering experience with a temperature variation within ±0.5°C. It ensures consistent water temperature and sufficient flow whether a single outlet or multiple outlets in the household are used simultaneously. The unit operates at a noise level below 40 decibels and includes an ECO smart energy-saving mode, providing comfortable hot water while prioritizing quiet operation and high efficiency, making it an ideal hot water solution for modern homes.
Features
-
Space Innovator: Ultra-slim wall-mounted design frees up floor space, adaptable to various home installation environments.
-
Instant Thermal Response: Patented combustion system achieves rapid heating within 3 seconds, eliminating traditional water storage waiting time.
-
Dual Fuel Compatibility: Intelligent chip automatically identifies propane/LPG fuel sources, requiring no manual adjustment.
-
Constant Temperature Showering Technology: Dual water-gas regulation algorithm controls temperature variation within ±0.5°C.
-
Smart Energy-Saving Solution: Automatically learns water usage patterns and intelligently switches to low-power mode during idle periods.

| Category | Specification Parameters |
|---|---|
| Product Model | DV-6L / DV-8L / DV-12L |
| Applicable Fuel | Propane / Liquefied Petroleum Gas (LPG) |
| Rated Heat Load | 20-35 MJ/h (varies by model) |
| Hot Water Output | 6 / 8 / 12 L/min (ΔT=25℃) |
| Thermal Efficiency | ≥90% (China National Standard Level 2 Energy Efficiency) |
| Ignition Method | Pulse Electronic Ignition |
| Temperature Control Accuracy | ±0.5℃ |
| Operating Noise | ≤40 dB(A) |
| Protection Rating | IPX4 Splash-Proof |
| Dimensions | 560×310×140 mm (uniform specification) |
| Net Weight | 8.5 kg |
| Flue Pipe Diameter | φ60/80 mm Dual Channel |
| Operating Water Pressure | 0.02-0.8 MPa |
| Power Specifications | 220V / 50Hz / ≤80W |
FAQ
Q1: Does this model require a flue/exhaust system?
A: Yes. This product is designed for forced exhaust and must be installed with the matching double-layer flue system (including air intake and exhaust outlet). It is strictly prohibited for use in enclosed spaces without proper venting.
Q2: How do I choose between the 6L/8L/12L capacities?
A: Selection is recommended based on the number of water outlets: 6L is suitable for studio apartments (1 water outlet), 8L meets the needs of small families (2 water outlets used simultaneously), and 12L is designed for homes with multiple bathrooms (3 water outlets operating concurrently).
Q3: Is the water temperature sufficient in winter?
A: The unit features a built-in low-temperature boost mode. When the inlet water temperature falls below 5°C, it automatically increases combustion power to ensure stable output water temperature during winter.
Q4: What prerequisites are needed for installation?
A: The following must be prepared: 1) Wall bearing capacity ≥50kg; 2) Independent gas shut-off valve; 3) φ80mm external wall exhaust hole; 4) 220V three-pole waterproof power socket (recommended within 1.5 meters of the unit).
Q5: How is energy efficiency achieved?
A: The unit is equipped with a smart memory function: after three consecutive days of use, it automatically learns user habits and switches to standby mode during non-usage periods, achieving a comprehensive gas saving rate of up to 15%.




