Hot Water Heater Open Flue Type Gas Geyser Shower
A flue gas water heater is a device that heats water by burning gas and is suitable for domestic and commercial purposes. Its working principle is to use the heat energy generated by the combustion of gas to heat water to a set temperature, and then discharge the exhaust gas. This type of water heater requires the installation of a chimney or flue, can continuously supply hot water, and is widely used for its high efficiency and rapid heating.
Compact Design: The water heater has a compact design, suitable for installation in places with limited space, such as apartments, small houses or small bathrooms.
Energy Efficient: Gas water heaters maximize the use of gas energy, reducing energy consumption and associated costs.
Rapid heating: The required hot water can be obtained in a short time, providing fast and convenient hot water supply.
Safe And Reliable: Complies with CE certification standards and has high safety and reliability.
Environmentally Friendly And Low Emission: the exhaust gas emission is low, and the impact on the environment is small.
Flue Pipe Exhaust Type
Efficiency is over 84%
Winter-summer switch
Fashion design for decorative panel
Over water pressure protection device
Flame failure safety device
Anti dry-burning protection device
Over heating protection
Temperature Indicator/Display
Product Parameter
|
Hot Water Output |
10L/Mins |
|
Heater Output Power |
20KW |
|
Gas Type |
LPG(Liquid Petroleum Gas) |
|
Gas Pressure |
2800Pa |
|
Water Temperature |
10℃-60℃ |
|
Water Connect |
G1/2‘’ |
|
Suitable Water Pressure |
0.02MPA-0.8MPA |
|
Starting Pressure |
0.015MPA |
|
Exhaust way |
Open Flue Type |
|
Discharge Ways |
Flue Automatic Gas Discharge |
|
Ignition |
2pcs 1.5V D-Type Batteries (not included) |
|
Heating Status |
Heating time =15s;Overtemperature =2℃ ;Stability Time:=15s |
|
Power supply |
Open Flue Type Gas Water Heater Ignited By Battery Power |
FAQ
