Flue-Type Instant Gas Water Heater Bathroom Shower LPG Gas Water Heater 10L
The heating system features precision gas modulation technology that automatically adjusts flame size according to water flow rate, maintaining output temperature stability within ±1°C. An integrated oxygen depletion sensor continuously monitors combustion efficiency, while multiple safety cut-offs provide protection against overheating, flame failure, and abnormal gas pressure. The compact vertical design optimizes wall space utilization, and the powder-coated steel casing with tempered glass front panel offers both durability and modern aesthetic appeal suitable for residential bathroom environments.
Features
-
Balanced Flue Safety - Sealed combustion system prevents bathroom air contamination
-
Instant Hot Water - 10L/min continuous flow with rapid heating response
-
Precise Temperature Control - ±1°C stability with automatic flow compensation
-
Bathroom-Optimized Design - Moisture-resistant construction with IPX4 rating
-
LPG Fuel Efficiency - 88% thermal efficiency with condensing technology
Product Parameter
| Parameter | Specification |
|---|---|
| Model Type | Flue-type Instant Gas Water Heater |
| Fuel Type | Liquefied Petroleum Gas (LPG) |
| Hot Water Output | 10 L/min at ΔT=25°C |
| Heating Capacity | 20 kW |
| Thermal Efficiency | 88% (minimum) |
| Flue System | Concentric balanced flue, Ø60/100mm |
| Operating Pressure | Gas: 2.8 kPa; Water: 0.02-1.0 MPa |
| Temperature Range | 30-60°C (adjustable) |
| Temperature Stability | ±1°C |
FAQ
Q1: Can this water heater be installed in any bathroom?
A1: Yes, provided there is an external wall for flue termination and adequate ventilation space around the unit. Minimum clearances are specified in the installation manual.
Q2: How quickly does it heat water?
A2: The unit provides instant hot water with approximately 2-3 seconds initial heating time. Full temperature is reached within 5-8 seconds depending on inlet water temperature.
Q3: What LPG cylinder size is recommended?
A3: For typical household use, a standard 15kg or 45kg LPG cylinder is suitable. Consumption averages 0.8-1.2kg per hour depending on usage intensity.
Q4: Is professional installation required?
A4: Yes, installation must be performed by a qualified gas technician familiar with flue-type water heater requirements and local gas regulations.
Q5: Does it work during power outages?
A5: No, electrical power is required for ignition, controls, and safety systems. The unit will not operate without mains electricity.