Whatsapp:(+86)18064615886
Components of a gas hot water system typically include:
Gas burner: responsible for heating the water. It burns natural gas to create a flame that transfers heat to water.
Heat Exchanger: The heat exchanger, usually made of copper or stainless steel, helps transfer heat from the gas burner to the water. As the hot gases from the burners pass through the heat exchanger, the water around it absorbs heat and increases in temperature.
Thermostat: The thermostat regulates the temperature of the water in the tank by controlling the operation of the gas burner. It turns the burner on and off as needed to maintain the desired water temperature.
Gas Control Valve: The gas control valve regulates the flow of natural gas to the burner. It can be manually adjusted or electronically controlled to ensure safe and efficient air supply.
Flue Exhaust System: Since gas burners produce combustion gases, a flue exhaust system is required to safely remove these gases from the system. It usually consists of a flue connected to the burner, which takes the exhaust gases outside.
Temperature and Pressure Relief Valve: This safety device is designed to relieve excessive pressure or temperature within the storage tank. It prevents tanks from bursting or water heaters from malfunctioning due to overpressure or overheating.
Plumbing connections: Various pipes, valves and fittings are used to connect the gas hot water system to the water supply and distribute the hot water to the required points of use within the building.
ZHONGSHAN VANGOOD APPLIANCES MFG CO.,LTD
Post time: Jul-25-2023
