Single Terminal Oven Battery Gas Stove Replacement Parts Igniter Module With Push Button

Single Output "AAA" Electronic Ignition Module With Push Button Battery Cap

Igniter Module With Push Button

1.5V BBQ Spark Generator 1 Outlet AA Battery Button Ignitor Igniter Gas Grill

Reasons and treatment methods of gas oven not catching fire:

Power supply problem, whether the battery is too old. Phenomenon: Check whether the indicator light of the AC power plug is on. If it does not, it means the power supply problem. Solution: Replace with a new battery.

The solenoid valve is malfunctioning. Phenomenon: If only the ignition sound is heard during ignition, and there is no magnetic “click” sound of the solenoid valve, the solenoid valve may be damaged or aging. If the solenoid valve is aging, it can be closed when the ignition starts, and the ignition will start, but then the ignition will be turned off. It may also be that the gas pressure is too high or too low. For water heaters that use cylinder gas, the output pressure of the cylinder pressure reducing valve will be too high or too low, causing the water heater to fail to ignite. There may also be dirt on the solenoid valve. The solenoid valve can't pass the gas, and the gas can't come out, so that it will not ignite. Before confirming the fault of the solenoid valve, please confirm whether the control circuit of the igniter is normal. If there is a fault, the solenoid valve cannot be closed.

Solution: Check the elimination method to determine the specific cause. If the solenoid valve is aging, replace the solenoid valve. If the gas pressure is problematic, replace the gas cylinder with a new one. If there is dirt on the gas valve, clean it up. If the ignition control circuit, repair to fix the circuit problem.

The electric igniter is malfunctioning. Phenomenon:There is no ignition sound and electric spark. Solution: Check whether one of the pulse igniter and the controller is faulty. If there is a fault, replace or repair it.